6
OWNER MAINTENANCE
14
AIR CLEANER ELEMENT
REPLACEMENT
G070A01E-EAT
HFC5003
Petrol engine
G070A02FC
Diesel engine
To replace the air cleaner element,
remove the air intake ducting from the
air flow sensor body and unfasten the
spring clips holding the air flow sensor
top to the body.
!
G050D02FC
6. Start the engine with the radiator
cap still removed and continue to
add coolant as the level decreases
as air is expelled from the system.
When the level remains constant,
replace the radiator cap and replen-
ish the coolant reservoir.
7. When the engine is hot, check to
ensure that no coolant leaks are
present.
WARNING:
The cooling fan is controlled by
engine coolant temperature and may
sometimes operate even when the
engine is not running. Use extreme
caution when working near the
blades of the cooling fan so that
you are not injured by a rotating fan
blade. As the engine coolant tem-
perature decreases, the fan will au-
tomatically shut off. This is a nor-
mal condition.
fcuk-6.p65 12/27/2006, 10:16 AM14
To Next Page
Loading...
Need help?
General
