1
CONTROLS AND EQUIPMENT
13
!
B080B02FC-EAT
FRONT SEATS
Front Seat Rake Adjustment
The front seat rake adjustment is per-
formed by raising the lever at the front
of the seat base and sliding the seat to
the desired position. At this position the
lever should be released and the seat
rocked to and fro to ensure that the
mechanism has locked.
WARNING:
To ensure the seat is locked se-
curely, attempt to move the seat for-
ward or rearward without using the
lock release lever.
SB070C1-E
Front Seat Recline Adjustment
The front seat back recline angle may
be adjusted by leaning forward slightly
and raising the recline adjustment lever
at the side of the seat. When the
seatback is at the desired angle, the
lever should be released. Ensure that
the seatback is locked before driving
the vehicle.
SB070D3-E
Head Restraint Adjustment
To raise the head restraint, pull it up. To
lower it, push it down whilst pressing
the lock knob. For maximum effective-
ness in the event of an accident, the
restraint must be adjusted so that the
restraint is approximately at the level of
the seat occupant's eyes. The restraint
must never be so adjusted that it is
centred about the level of the seat
occupant's neck.
HFC2024-D
HFC2025-D
Lock Knob
HFC2028
fcuk-1.p65 12/27/2006, 10:11 AM13