5-68
Driving your vehicle
4WD operation
• The main goal of 4WD Lock mode is to allow a driver to maximise the
vehicle’s traction under extreme driving conditions such as unpaved
off-road, sandy roads, and muddy roads.
• 4WD Lock mode is in operation only when a vehicle travels at 60 km/h
or less. When travelling at 60 km/h or faster, the mode will switch to
4WD Auto.
• When 4WD Lock mode illuminates, the cluster does not display the
front/rear wheel traction force distribution status.
• Press the 4WD Lock mode switch again to switch back to 4WD Auto.
4WD AUTO
(4WD LOCK is
deactivated)
(not illuminated)
Transfer mode Selection button Indicator light Description
• 4WD Auto is used when driving on roads in normal conditions, roads
in urban areas, and on highways.
• All wheels are in operation when a vehicle travels at a constant speed.
Required tractions applying on front and rear wheels vary depending
on road driving conditions and driving conditions, which will be auto-
matically controlled by the computing system.
• When the cluster's 4WD Auto display mode is selected, the cluster
displays the status of how four wheels’ traction forces are distributed.
4WD LOCK
(illuminated)
Four Wheel Drive (4WD) mode selection
If the 4WD warning light ( ) stays on the instrument cluster, your vehicle may have a malfunction with the
4WD system. When the 4WD warning light ( ) illuminates we recommend that the vehicle be checked by
an authorised HYUNDAI dealer as soon as possible.
WARNING
To Next Page
Loading...
Need help?
General
