IBM 3174 Reference Guide

Status Codes
Status Codes
The status codes listed in Table 4-2 may appear, with the appropriate messages, in the message area of
the Connection Menu. If a status code appears that is not listed here, see the 3174 Establishment
Controller Status Codes manual or call your system administrator.
Table
4-2 (Page 1 of 2). Status Codes
Status
Code
Meaning
Action
802 01 You are attempting to connect to a host that you
are not authorized to use.
Select only your default host.
802 02
You are attempting to establish communication
with an ASCII printer before the 3174 port is
available for use. The switched disconnect
timer has to expire before this 3174 port
becomes available.
Walt until the time-out period is over. Then try
to establish the connection.
802 03 You attempted to establish communication with
an ASCII host, but all the 3174 ports going to
that host are busy.
Try the connection request later.
802 04 An outgoing call on a 3174 port occurred at the
same time a call came in.
Try the connection request later.
802 05 The host connection is in progress.
No action is required. Walt until the host
connection is compieted.
802 06 You pressed PF3 to return to a previous host
connection, but a previous host connection does
not exist.
Select a host.
802 07 You attempted to test a 3174 port that is being
used.
Verify that you are entering the correct port
number in the test request.
803 01 You attempted to communicate with an ASCII
host, but the keyboard attached to the terminal
is not supported for 3270-terminal-to-ASCII-host
communication.
Use a terminal that has a keyboard supported
for communication with an ASCII host. The
supported keyboards are:
• U.S. English typewriter keyboard
• APL keyboard
• Text keyboard
• Converged keyboard with numeric keypad
• IBM Enhanced keyboard with numeric
keypad.
803 02 You entered an invalid host number.
Select from the Connection Menu a host number
that has a host name next to it, or type the host
name you want to use.
803 03 You entered invalid data to select another host.
The Connection Menu contains the valid data.
Enter a valid host number or name.
803 04
You pressed an Invalid key.
Press a valid key. If the problem continues,
check the keyboard map for the terminal you
are using.
804 10
804 20
The Inactivity timer expired because no data
flow activity is occurring on this port. The
connection is broken.
Select a host number or name from the
Connection Menu.
815 20 The incoming call was received while an
outgoing call was in progress on a 3174 port.
Try the connection request.
4-6 3174 Establishment Controller Terminal User's Reference for Expanded Functions

IBM 3174 Specifications

General

Brand	IBM
Model	3174
Category	Controller
Language	English