IBM 3592 User Manual

Table 56: Fibre Options menu (Services menu) (continued)
Function Next menu
Port/Node Names… “Port/Node Names menu (Services menu)” on page 101
Set Port 0… “Set Port 0 {or 1} menu (Services menu)” on page 101
Set Port 1… “Set Port 0 {or 1} menu (Services menu)” on page 101
Note:
1. Supplemental Message Line 1: Port0 ID=aa bb cd
2. Supplemental Message Line 2: Port1 ID=aa bb cd
Cancel
Causes the “Services menu” on page 97 to display.
Port/Node Names
Displays the Port/Node Name that is assigned to the drive.
Set Port 0…
Causes the “Set Port 0 {or 1} menu (Services menu)” on page 101 to display.
Set Port 1…
Causes the “Set Port 0 {or 1} menu (Services menu)” on page 101
to display.
Note: Refer to “Messages and supplemental messages (Fibre Channel only)” in Table 44 on page 79 for
bre-addressing information.
Port/Node Names menu (Services menu)
Table 57 on page 101 shows the Port Names and Node Names menu items.
Table 57:
Port/Node Names menu (Services menu)
Function Next menu
Port Names/WWID
0=5005076302400143
1=5005076302800143
“Fibre Options menu (Services menu)” on page 100
Node Name/WWID
0=5005076302000143
1=5005076302C00143
“Fibre Options menu (Services menu)” on page 100
Note:
1. Supplemental Message Line 1: Port0 ID=aa bb cd
2. Supplemental Message Line 2: Port1 ID=aa bb cd
Port 0 Name
Displays the 16-byte Port Name that is assigned to the Port.
Port 1 Name
Displays the 16-byte Port Name that is assigned to the Port.
Note: Refer to “Messages and Supplemental Messages (Fibre Channel Only)” in Table 44 on page 79 for
bre-addressing information.
Set Port 0 {or 1} menu (Services menu)
Table 58 on page 102 shows the Set Port 0 menu and the Set Port 1 menu items.
Virtual Operator panel
101

IBM 3592 Specifications

General

Brand	IBM
Model	3592
Category	Storage
Language	English