• Library information - Library Type/Model, Library Serial Number, Library Firmware Level, Library
Interface Speed, Library IP address, Drive's Element Address, Drive's Position
• VPD Encryption Settings
• Drive Statistics - Drive Mounts, Drive MB Written, Drive MB Read, Power On Hours (current/VPD)
• Tape Statistics - Volume Serial (origin), Tape Mounts, Tape MB Written, Tape MB Read
• Manufacturing Information - Serial Number, Part Number, and EC Number for Card, Bezel, Head, MCA,
Deck, Drive
• Host Reservation (SPC-2) - create time, device path, host name, OS version, driver version, WWPN,
reservation type
• Host Media Removal (prevented) - create time, device path, host name, OS version, driver version,
WWPN
• FID Error Log
• TEMP Error Log
Display of the information in each category can be toggled by the associated check box.
Electrostatic discharge (ESD) sensitive parts
1
2
3
4
5
ATTENTION
Static-Sensitive
Devices
a1400049
Figure 67: Static-sensitive device attention symbol and grounding wrist strap
When you are wearing the ESD grounding wrist band ( 1 ), ensure that the ground clip ( 4 ) remains
connected. Failure to do this procedure creates a safety exposure, the same as wearing jewelry while you
are working on live exposed electrical circuits.
Use the most current IBM part number available when you are order a eld ESD kit. In addition to the mat,
the kit P/N 93F2649 contains the following components in a resealable, static-shielding bag.
• Adjustable wrist band P/N 6405959 ( 1 )
• Wrist band cord P/N 74F9658 ( 2 )
• Mat cord P/N 93F2652 ( 3 )
• Large ground clip P/N 93F2654 ( 4 )
• Cord extension P/N 93F2653 ( 5 )
All of the 3592 drive logic cards and sensors in the drive are ESD-sensitive parts.
192
IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information
To Next Page
Loading...
Need help?
General