IBM 8183 - ThinkCentre S50 User Manual

Accessing system board components and drives
You might need to rotate the drive bay assembly upward and remove the PCI riser
and adapters to access system board components such as memory, the battery, the
Clear CMOS/BIOS recovery jumper and to access the drives.
To access system board components and the drives:
1. Turn off the computer.
2. Open the cover. See “Opening the cover” on page 10.
3. Rotate the drive bay assembly upward as illustrated.
Note: Make sure you note the location of any cables that you disconnect from
the drives or the system board.
4. If any PCI adapters are installed, remove the PCI riser and adapter cards. Do
not remove any adapters from the riser card. See “Installing PCI adapters” on
page 15.
12 User Guide

IBM 8183 - ThinkCentre S50 Specifications

General

Brand	IBM
Model	8183 - ThinkCentre S50
Category	Desktop
Language	English