SAS cabling congurations
The following sections provide the typical supported SAS cabling congurations. Many congurations can
be constructed that are not supported and will either not function correctly or generates errors. To avoid
problems, restrict cabling to only the general types of congurations that are shown in the following
sections.
• “SAS adapter to media expansion drawer” on page 116
• “SAS adapter to expansion drawer combinations” on page 116
• “System external SAS port to disk expansion drawer” on page 117
• “Two RAID SAS adapters with HD connectors to disk expansion drawer in a multi-initiator high
availability (HA) mode (dual storage adapter conguration)” on page 118
SAS adapter to media expansion drawer
Figure 40 on page 116 illustrates connecting a SAS adapter to a media expansion drawer. It is also
possible to connect a second media expansion drawer to the second port of the SAS adapter.
Figure 40. SAS adapter to a media expansion drawer
SAS adapter to expansion drawer combinations
Figure 41 on page 117 illustrates connecting a PCIe SAS adapter to both a disk expansion drawer and a
media expansion drawer on separate adapter ports.
116
Power Systems: Site and hardware planning