EasyManuals Logo
Home>IBM>Server>BladeCenter HS22

IBM BladeCenter HS22 Product Guide

IBM BladeCenter HS22
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
IBM BladeCenter HS22 8
Memory options
IBM DDR3 memory is compatibility tested and tuned for optimal System x performance and throughput.
IBM memory specifications are integrated into the light path diagnostics for immediate system
performance feedback and optimum system uptime. From a service and support standpoint, IBM memory
automatically assumes the IBM system warranty, and IBM provides service and support worldwide.
The HS22 has six DIMM sockets per processor (12 DIMMs in total) and uses Double Data Rate-3
(DDR-3) very-low-profile (VLP) registered DIMMs. Servers with Intel Xeon 5600 series processors
support 16GB DIMMs meaning a total of up to 192 GB of RAM is supported. Servers with Intel Xeon 5500
series processors support 8GB DIMMs meaning a total of up to 96 GB of RAM is supported. The memory
DIMMs connects directly to one of the processors. With one processor installed, only six DIMMs can be
accessed. To access memory in the other six DIMM connectors, the second processor must be installed.
The following two tables list memory options available for HS22 server: one of 5500 series processors
and one for 5600 series processors. DIMMs can be installed one at a time, but for performance reasons,
install them in sets of three (one for each of the three memory channels).
Table 7. Memory options for servers with Xeon 5500 series processors
Part number Feature
code
Description Models
where used
49Y1427 8928 1 GB (1x 1 GB, 1Rx8, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz -
49Y1428 8929 2 GB (1x 2 GB, 2Rx8, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz -
49Y1429 8930 2 GB (1x 2 GB, 1Rx4, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz -
44T1594 A0YV 2 GB (1x 2 GB, 1Rx8, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz -
46C0560 A0WX 2 GB (1x 2 GB, 1Rx8, 1.35 V) PC3L-10600 CL9 ECC DDR3 1333 MHz -
49Y1430 8931 4 GB (1x 4 GB, 2Rx4, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz -
44T1596 1908 4 GB (1x 4 GB, 2Rx8, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz -
46C0563 A0WY 4 GB (1x 4 GB, 1Rx4, 1.35 V) PC3L-10600 CL9 ECC DDR3 1333 MHz -
46C0564 A0WZ 4 GB (1x 4 GB, 2Rx8, 1.35 V) PC3L-10600 CL9 ECC DDR3 1333 MHz -
49Y1431 8932 8 GB (1x 8 GB, 2Rx4, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz -

Other manuals for IBM BladeCenter HS22

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM BladeCenter HS22 and is the answer not in the manual?

IBM BladeCenter HS22 Specifications

General IconGeneral
Tcase76.2 °C
Bus typeQPI
SteppingB1
FSB ParityNo
Processor codeSLBZ8
Processor cache12 MB
Processor cores6
Processor modelE5649
System bus rate5.86 GT/s
Processor seriesIntel Xeon 5600 Series
Processor socketSocket B (LGA 1366)
Processor threads12
Processor codenameWestmere EP
Processor frequency2.53 GHz
Processor cache typeSmart Cache
Processor lithography32 nm
Processor manufacturerIntel
Processor package size42.5 X 45 mm
Processor front side bus1333 MHz
Processor boost frequency2.93 GHz
Processor operating modes64-bit
ECC supported by processorYes
Supported instruction setsSSE4.2
Thermal Design Power (TDP)80 W
Compatible processor seriesIntel® Xeon®
Number of processors installed1
CPU multiplier (bus/core ratio)19
Maximum number of SMP processors2
Physical Address Extension (PAE)40 bit
Memory types supported by processorDDR3 800/1066/1333
Memory channels supported by processorTriple
Memory bandwidth supported by processor (max)32 GB/s
Maximum internal memory supported by processor288 GB
HDD size2.5 \
RAID levels0, 1
HDD interfaceSerial Attached SCSI (SAS)
Total storage capacity0 GB
Maximum storage capacity1 TB
Number of HDDs installed0
Internal memory12 GB
Memory clock speed- MHz
Internal memory typeDDR3-SDRAM
Maximum internal memory192 GB
Memory layout (slots x size)3 x 4 GB
Graphics cardG200eV
Graphics card memory typeGDDR2
Networking featuresGigabit Ethernet
PS/2 ports quantity-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible operating systemsMicrosoft Windows RedHat, SUSE, VMware Oracle Solaris
Chassis typeRack (1U)
Processor ARK ID52581
Intel® Turbo Boost Technology1.0
Weight and Dimensions IconWeight and Dimensions
Depth446 mm
Width245 mm
Height29 mm
Weight5400 g

Related product manuals