Table 16. Disk drive set feature codes
Feature
Code
Size and description
(see Notes)
Disk speed in
RPM (K = 1000)
DS8000 Models
2416 300 GB Drive Set 15K
941 and 94E
2616 450 GB Drive Set 15K
2716 600 GB Fibre Channel
Drive Set
15K
2916 2 TB SATA Drive Set 7.2K
2990 Customer Supplied Drive
Set
–
6214
3
600 GB SSD Drive Set 15K
6216
3
600 GB SSD Half Drive
Set
15K
2208 146 GB Drive Set 15K
951 and 95E
2308 300 GB SAS Drive Set 15K
2608 450 GB Drive Set 10K
2708 600 GB Drive Set 10K
2758 900 GB SAS Drive Set 10K
2858 3 TB SAS Drive Set 7.2K
2990 Customer Supplied Drive
Set
–
6006
1, 2
300 GB SSD Half Drive
Set
N/A
6106
1, 2
400 GB SSD Half Drive
Set
N/A
6008
1, 2
300 GB SSD Disk Drive
Set
N/A
6108
1, 2
400 GB SSD Disk Drive
Set
N/A
Note:
1. The maximum number of features allowed for 6006 is 1. The maximum allowed for
6008 is 12. The maximum number of features allowed for 6106 is 1. The maximum
allowed for 6108 is 12.
2. Feature codes 6006 and 6008 cannot be mixed within a drive enclosure. Feature codes
6106 and 6108 cannot be mixed within a drive enclosure.
3. In a DS8700, 8 drives are the minimum number of SSDs (Raid-5 only) that are
supported. A single DDM failure in a minimum configuration triggers the call home
feature.
Feature codes for IBM Full Disk Encryption disk drive sets
Use the IBM Full Disk Encryption (FDE) disk drive feature codes to order the
encryption disk drive sets for your storage unit.
Each IBM Full Disk Encryption disk drive set provides 16 disk drives. Table 17 on
page 96 provides the various encryption disk drive sets that you can order (based
on disk size and RPM), and the feature codes to use.
Chapter 4. Storage unit physical configuration 95
To Next Page
Loading...
Need help?
General