IBM eserver pSeries 7311 D10 User Manual

7311 Model D10 I/O Subsystem Location Code Table
The following table lists the location codes for a D10 I/O subsystem. The location code
for the I/O subsystem connected to a system unit is U0.
dd (where dd can be any
number from 2 through 63).
FRU Name Physical Location Code
Model D10 I/O Drawer U0.
dd ( dd = any number from 2 through 63)
I/O subsystem 1 drawer U0.
dd
I/O backplane U0. dd -P1
RIO connector riser card U0.
dd -P1.1
RIO port 0 (upper connector) U0.
dd -P1.1/Q1
RIO port 0 cable U0.
dd -P1.1/Q1#
RIO port 1 (lower connector) U0.
dd -P1.1/Q2
RIO port 1 cable U0.
dd -P1.1/Q2#
PHB1 U0.
dd -P1
EADS_X under PHB1 U0.
dd -P1
PCI slot 1 U0.
dd -P1/I1
PCI slot 1 adapter U0.
dd -P1-I1
PCI slot 2 U0.
dd -P1/I2
PCI slot 2 adapter U0.
dd -P1-I2
PCI slot 3 U0.
dd -P1/I3
PCI slot 3 adapter U0.
dd -P1-I3
PHB2 U0.
dd -P1
EADS_X under PHB2 U0.
dd -P1
PCI slot 4 U0.
dd -P1/I4
PCI slot 4 adapter U0.
dd -P1-I4
PCI slot 5 U0.
dd -P1/I5
PCI slot 5 adapter U0.
dd -P1-I5
PCI slot 6 U0.
dd -P1/I6
PCI slot 6 adapter U0.
dd -P1-I6
Power supply 1 (with 2 fans) U0.
dd -V1
Power supply 2 (with 2 fans) U0.
dd -V2
Cooling fan 5 U0.
dd -F5
Rack indicator connector (4-pins) U0.
dd -P1/Q3
SPCN connector J15 U0.
dd -P1/Q4
SPCN connector J16 U0.
dd -P1/Q5
Subsystem VPD U0.
dd -P1
Chapter 1. Reference Information
15

IBM eserver pSeries 7311 D10 Specifications

General

Brand	IBM
Model	eserver pSeries 7311 D10
Category	Server
Language	English