To Next Page

To Previous Page

118

Updated

28/02/01

To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc

Appendix B: Tape Library Attributes

00N79xx

DLT Tape Autoloader M68 Desktop Y

M0.8mm - F68

Converter

Y 1/7 1 1/1 1/1 280/560 5/10

00N79xx

DLT Tape Library - Tower M68 Desktop Y M68-M68 (3) Y 1/14 1 2/2 1/3 490/980 5/10

00N79xx

DLT Tape Library - Rack

M68 4U Rack Y M68-M68 (3) Y 1/14 1 2/2 1/3 490/980 5/10

33L4979 DLT Library Drive Upgrade

M68 - N Jumper N - - - - - 5/10

1. Transfer rates are for single SCSI Channel configurations. Tape Libraries utilizing split library or dual host configurations may obtain higher rates. Data compression typically provides a 2X improvement in

capacity and transfer rate, bur since data compression is affected by many factors , actual improvements may be more or less than 2X.

2. Includes Fixed Shelf P/N 94G7442 for installation in an IBM Rack or NetBAY22.

3. Upgrade 33L4979 is an additional drive for DLT Tape Libraries. Up to two tape drives may be installed for a maximum of three drives per DLT Tape Library

4. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.

5. Where ‘xx’ represents a country specific power cord code:

Tower versions - 74=EU1, 75=Denmark, 76=India/South Africa, 77=UK, 78=Swiss, 79=Italy, 80=Israel: Rack versions - 81=EU1,

82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.

SCSI INTERFACE

LEGEND

F: Female - External

M: Male - External

68: 16-bit, 68-pin High Density connector

0.8: 16-bit, 68-pin Very High Density Connection

Interface (VHDCI) 0.8 mm connector

Diff: Differential SCSI

Description