96
Updated
28/02/01
To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc
IBM FAStT200 (HA) Configurator
FAStT200 Storage Server - Hard Disk Drive (HDD) Configurator
Total Internal
Storage
1
10,000 RPM Fibre Channel HDDs 15,000 RPM Fibre
Channel HDD
18.2 GB
(P/N 19K0652)
36.4 GB
(P/N 19K0653)
73.4 GB
(P/N 19K0654)
18.2 GB
(P/N 06P5707)
0 GB 0GB Standard on Base Models 0GB Standard on Base Models
18.2 GB 1 - - 1
36.4 GB 2 or 1 - 2
54.6 GB 3 - - 3
72.8 GB 4 or 2 - 4
73.4 GB - - 1 -
91.0 GB 5 - - 5
109.2 GB 6 or 3 - 6
145.6 GB 8 or 4 - 8
146.8 GB - - 2 -
182.0 GB 10 or 5 - 10
218.4 GB - 6 - -
220.2 GB - - 3 -
254.8 GB - 7 - -
291.2 GB - 8 - -
293.6 GB - - 4 -
327.6 GB - 9 - -
364.0 GB - 10 - -
367.0 GB - - 5 -
440.4 GB - - 6 -
513.8 GB - - 7 -
587.2GB - - 8 -
660.6 GB - - 9 -
734.0 GB (max) - - 10 -
This table does not represent all valid hard disk drive (HDD) configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the HDD of choice. Total
Internal Storage listed is within +- 0.2 GB unless otherwise noted.
Part
Number
Description RPM Height Bays
Supported
Max. Qty
Supported
19K0652 18.2 GB 10K-4 FC Hot-Swap HDD 10,000 SL 1...10 10
19K0653 36.4 GB 10K-4 FC Hot-Swap HDD 10,000 SL 1...10 10
19K0654 73.4GB 10K-4 FC Hot-Swap HDD 10,000 HH 1...10 10
06P5707 18.2 GB 15K-rpm FC Hot-Swap HDD 15,000 SL 1...10 10
External Storage Expansion Unit Form Factor
19K11xx
4
FAStT200 Storage Server
1,2,3
Rack (3U)
19K11xx
5
FAStT200 HA Storage Server
1,3
Rack (3U)
19K1121 FAStT200 Redundant RAID Controller
2
-
94G7448 Rack Power Cable Type C12 (3.7m)
3
-
1. The FAStT200 Storage Server and HA Storage Server include two hot-swap, 350 W auto-ranging redundant power supplies each with it’s own
standard country power cord.
2. Can be upgraded to a FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller P/N 19K1121.
3
. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or PDU). Standard country
power cords only are included. If required, order one Rack Power Cable for each power supply.
4. Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German,
28=Denmark/English, 29=Israel/English, 30=Italy/English, 31=South Africa/English, 32=Switzerland/English, 34=Switzerland/German,
36=UK/English. Country/Language - Line Cords/Publications are included as indicated
5. Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German,
42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South Africa/English, 46=Switzerland/English, 48=Switzerland/German,
50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
To Next Page
Loading...
Need help?
General