97
Updated
28/02/01
External: Fibre Channel
Internal: Fibre Channel
Auto Termination
Fibre Channel
Connectors
3
IBM FAStT200 Storage Server P/N 19K11xx
1,2,4,6
IBM FAStT200 HA Storage Server P/N 19K11xx
1,2,5,6
1. Housed in a 19" Rack mountable drawer and ships standard with redundant power supplies and two standard country power
cables requiring separate power sources. Requires IBM industry standard 19" rack, EIA-310D, with a minimum depth of 24"
(711.2 mm) or NetBAY3/3E.
Note: The FAStT200 Storage Server and HA Storage Server do not ship with a storage controller or external cables. Select
these items from the Fibre Channel Device Ports Reference Chart in the Fibre Array Solutions section.
2. The FAStT200 Storage Server includes a single loop only. The second loop (shown in the diagram) is available with the
addition of a FAStT200 Redundant RAID Controller P/N 19K1121. This configuration then becomes equivalent to the
FAStT200 HA Storage Server.
3. GBICs are not included. Either Fibre Channel Long or Short-Wave GBICs (P/N 03K9307 or 03K9308 respectively) may
be used.
4. Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/
German, 28=Denmark/English, 29=Israel/English, 30=Italy/English, 31=South Africa/English, 32=Switzerland/English,
34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated.
5. Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/
German, 42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South Africa/English, 46=Switzerland/English,
48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
6. This unit does not include a Rack Power Cable P/N 94G7448 when shipped (for attachment to high voltage UPS or PDU).
A standard country power cord only is included. If required, order one Rack Power Cable for each power supply.
IN
OUT
OUT
IN
Loop B
Loop A