IBM eServer xSeries User Manual

58
Updated
28/02/01
To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc
IBM Netfinity 6000R Configurator
21RYMxx
1
- 700 1/4 1024 512MB(R)/16GB Rack(4U) 1/3
P, S,
H,F
S-Fans
O-Power
4
Y 10/100 D,U160 2/0
0/218.4
GB
40X-17X 8/6
6
6/6
22RYMxx
1
- 700 1/4 2048 512MB(R)/16GB Rack(4U) 1/3
P, S,
H,F
S-Fans
O-Power
4
Y 10/100 D,U160 2/0
0/218.4
GB
40X-17X 8/6
6
6/6
1. Housed in a 19” Rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Netfinity 6000R Power, Monitor & Accessories” for supported IBM racks.
2. Intel Pentium III Xeon processor with full speed ECC L2 cache and 100 MHz access to memory and I/O buses. IBM intends to make available a Netfinity 6000R model containing an Intel 800 MHz/2 MB
L2 Cache Pentium II Xeon processor when Intel makes this processor generally available to the marketplace.
3. Advanced Chipkill ECC memory corrects two-, three-, and four-bit memory errors.
4. N+1 power supply redundancy requires a minimum of one optional Netfinity 270 W Hot-Swap Redundant Power Supply P/N 37L6879. Robust configurations may require two. See “Power” under
“Netfinity 6000R Power, Monitors, Accessories” for additional information.
5. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
6. Netfinity 6000R includes three hot-swap bays. Optional Netfinity 3-Pack Ultra 160 Hot-Swap Expansion Kit P/N 33L5050 expands the total hot-swap bays to six.
Netfinity 6000R Processor Upgrades
Part Number Processor Upgrades with Full Speed Cache SMP
Support
1
Processor Speed
Upgrade
2
00N7946 Netfinity 700 MHz/1 MB Upgrade with Pentium III Xeon Processor 21RYMxx -
00N7944 Netfinity 700 MHz/2 MB Upgrade with Pentium III Xeon Processor 22RYMxx 21RYMxx
1. Three additional processors may be installed, providing a maximum of four. All processors must be identical in type, speed, and cache size. Processors must be installed in
numerical order from slot 1 to slot 4.
2. Requires removal of the standard processor. A maximum of four processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may
require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and
then “BIOS”.

IBM eServer xSeries Specifications

General

Brand	IBM
Model	eServer xSeries
Category	Server
Language	English