IBM eServer xSeries User Manual

32
Updated
28/02/01
To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc
xSeries 230 / Netfinity 5100 Power, Monitors, Accessories
Part Number Description
Power
1,10
33L37xx
11
250 W Hot-Swap Redundant Power Supply
2, 10
37L6881 Hot-Swap Power Supply Expansion Kit
3
94G7448 Rack Power Cable Type C12 (3.7m)
10
Free Standing Uninterruptible Power Supply (UPS)
4
SUP102Y APC Smart-UPS 1000
SUP142Y APC Smart-UPS 1400
Rack Mount Uninterruptible Power Supply (UPS)
4
14RIxxx
13
APC Smart-UPS 1400RMB
5
30RIxxx
13
APC Smart-UPS 3000RMB
5
37L6862 APC Smart-UPS 5000RMB
6
Monitors
7
T3347xx
12
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
8
T31U2xx
12
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
8
T32U3xx
12
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
8
T274Axx
12
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
8
11AG1xx
12
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
9
1. xSeries 230 / Netfinity 5100 include a single 250 W, hot-swap power supply and a single standard country power cord. Power supply redundancy may be achieved with the addition of optional
250 W Hot-Swap Redundant Supply P/N 33L37xx
11
. Hot-Swap Power Supply Upgrade Kit P/N 37L6881 is required when optional power supplies are to be added. Redundancy for configurations
of greater than 250W requires installation of a second optional supply. Whenever SCSI devices are installed in bays A or B, both the expansion kit and a second power supply are required. Generally
speaking, configurations containing greater than six PCI adapters and HDDs, in any combination, will require an additional power supply. To assist in determining when an additional power supply
is required to preserve redundancy, a “Non-Redundant LED” is a standard feature.
2. 250 W Hot-Swap Redundant Power Supply P/N 33L37xx includes a single standard country power cord for connection to a low voltage wall outlet. Hot-Swap Power Supply Expansion Kit
P/N 37L6881 must be installed prior to adding optional power supplies.
3. Hot-Swap Power Supply Expansion Kit P/N 37L6881 includes a hot-swap power backplane, terminated two-drop LVD SCSI cable, and mounting brackets for DLT tape drives. Required when
installing a second power supply or devices in the 133-mm (5.25”) HH bays.
4. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
5. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
6. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
7. Netfinity 5100 uses an SVGA controller (S3 Savage4 chipset) with 8 MB of video memory.
8. Installation within a rack requires optional Monitor Compartment P/N 94G7444.
9. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II P/N 37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver keyboard may coexist
within the same keyboard tray.
10. Rack Power Cable P/N 94G7448 (type C12 - one for each power supply), must be ordered for power connection of a Rack model to a high voltage UPS or PDU.
11. Where ‘xx’ refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark, 63=Israel, 64=Italy, 65=South Africa, 66=Switzerland, 67=United Kingdom&Arabia.
12. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
13. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland, UKM=United Kingdom,
EUR=Europe.
Part Number Description
Conversion Kits
37L6858 5Ux24D Tower-to-Rack Kit
Rack and NetBAY
1,8
930842P Netfinity Enterprise Rack
930842X Netfinity Enterprise Expansion Cabinet
9306900 Netfinity Rack
9306910 Netfinity Rack (includes perforated front door)
9306200 Netfinity NetBAY22
37L6888 Netfinity Flat Panel Monitor Rack Mount Kit II
94G7448 Rack Power Cable Type C12 (3.7m)
8
Keyboard and Mouse
2
28L36xx
6
Space Saver II Keyboard
3, 5
28L36xx
7
Preferred Keyboard (stealth black)
4
28L3675 Sleek 2-Button Stealth Black Mouse
1. xSeries 230 / Netfinity 5100 rack models are housed in a 19” rack mountable drawer and require one of the racks listed here. See IBM Netfinity Rack Cabinet and Options section for IBM rack
supported devices.
2. Tower models include both a keyboard and mouse. Rack models include neither.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
4. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
5. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
6. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English, 44=US English, and P/N 19K3831=Switzerland, 19K3832=Sweden/
Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
7. Where
‘xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=English, 31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
8. The xSeries 230 / Netfinity 5100 ships with a standard country power cord. For connection of a Rack model to a high voltage UPS or PDU, a Rack Power Cable P/N 94G7448 (type C12 - one for
each power supply), must be ordered.

IBM eServer xSeries Specifications

General

Brand	IBM
Model	eServer xSeries
Category	Server
Language	English