132 IBM Desktop System HMM
General Guidelines
The purpose of this Safety Inspection Guide is to help
you identify possible unsafe conditions on machines
that are being inspected for a Maintenance
Agreement. Each machine has necessary functions
items installed to provide the operators and service
personnel with an acceptable level of safety. This
guide lists only these items. Good judgment should
be used to identify possible safety conditions not
covered by this Safety Inspection Guide.
If any unsafe conditions are present, you must find
out how serious the hazard is and if you can continue
before you correct the hazard.
All current IBM Personal Computer service
supplements outlining feature/model changes, along
with the machine history, should be reviewed.
Check the following items:
•
Damaged, missing, or changed parts, especially in
the area of the On/Off switch and the power
supply.
•
Damaged, missing, or changed covers.
•
Possible safety exposure from any non-IBM
attachments.
To Next Page
Loading...
Need help?
General
