xContents
2.3 Detailed Installation 2-2
2.4 SAS Device Cables 2-6
2.4.1 Connecting the ServeRAID M5014 or ServeRAID M5015
SAS/SATA Controller to Physical Drives 2-8
2.5 After Installing the Controller 2-10
Chapter 3
ServeRAID M5014/M5015 SAS/SATA Controller Characteristics
3.1 ServeRAID M5014/M5015 SAS/SATA Controller Descriptions 3-1
3.1.1 Board Layout and Connector Information 3-2
3.2 Characteristics of the ServeRAID M5014/M5015 Controllers 3-4
3.3 Technical Specifications 3-4
3.3.1 Controller Specifications 3-5
3.3.2 Array Performance Features 3-6
3.3.3 Fault Tolerance 3-7
3.3.4 Power Supply Requirements for the ServeRAID
M5014/M5015 Controllers 3-7
3.3.5 Operating and Non-operating Conditions 3-8
3.3.6 Safety Characteristics 3-9
Chapter 4
Intro to the ServeRAID M5000 Series Battery Assembly
Chapter 5
Installing a ServeRAID M5000 Series Battery Assembly
5.1 Installing the ServerRAID M5000 Series Battery Assembly on a
Controller 5-2
Chapter 6
Using the ServeRAID M5000 Series Battery Assembly
6.1 Monitoring the Battery Backup with the MegaRAID Configuration
Utilities 6-2
6.1.1 Monitoring the ServeRAID M5000 Series Battery
Assembly with the WebBIOS Configuration Utility 6-2
Setting the Learn Delay Interval 6-5
Setting the Learn Mode 6-5
To Next Page
Loading...
Need help?
General
