IBM System x3400 M3 Types 7378 User Manual

7. Connect the cables and power cords. For more information, see “Connecting
the cables.”
Connecting the cables
Notes:
1. Be sure to turn off the server before you connect any cables to or disconnect
any cables from the server or hot-plug adapter.
2. For additional cabling instructions, see the documentation that comes with the
optional devices. It might be easier for you to route any cables before you install
certain optional devices.
3. Cable identifiers are printed on the cables that come with the server and
optional devices. Use these identifiers to connect the cables to the correct
connectors. For example, the hard disk drive cables are labeled “HDD option.”
Chapter 2. Installing optional devices 99

IBM System x3400 M3 Types 7378 Specifications

General

Brand	IBM
Model	System x3400 M3 Types 7378
Category	Server
Language	English