Opening the bezel media door
To open or remove the media door, complete the following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 29.
2. Unlock the left-side cover.
Note: You must unlock the left-side cover to open or remove the bezel. When
you lock the left-side cover, it locks both the cover and the bezel.
3. Press the button on the left edge of the bezel, and rotate the left side of the
bezel away from the server.
4. From inside of the top section of the bezel door, slide the blue tab up to unlock
the bezel media door; then, grasp the depressed area on the left side of the
media door and pull the door open.
50 IBM System x3400 M3 Types 7378 and 7379: Installation and User's Guide