IBM Terminal Emulation TN5250 User Manual

The Menu System 2-13
Edit Keys Menu
Keys can be edited or changed by using the F2 key, entered in the Keyboard
Mapping menu. Position the cursor next to the key you want to edit, in any of
the key mapping menus, and press
F2. This key invokes the Edit Keys menu.
With this menu, you can change or remap any of the emulator keys displayed
in the Keyboard Mapping menu. Figure 2-9 shows the Edit Keys menu.
Figure 2-9 Edit Keys Menu
To edit a key:
1
When you select a key in the Keyboard Mapping menu for editing and
press the
F2 key as explained in “Edit Keys Menu”, the default octal value
of the key and its description are displayed in the Edit Keys menu.
2
You can then overwrite the value and description to remap the key.
3
Press
Ctrl (right).
The new key value and description are displayed.
❖
Note
Up to four key sequences can be remapped at once.
Edit Keys
5250 Key: Backward Tab
Key Sequence: ___________________________________________
Description: ___________________________________________
Key Sequence: ___________________________________________
Description: ___________________________________________
Key Sequence: ___________________________________________
Description: ___________________________________________
Key Sequence: ___________________________________________
Description: ___________________________________________
Right Ctrl:Current Selection
Tab:Next Field F1:Help F2:Auto Key Entry
F3:Exit Menu F12:Prev Menu

IBM Terminal Emulation TN5250 Specifications

General

Brand	IBM
Model	Terminal Emulation TN5250
Category	Software
Language	English