Error Messages A-3
The Status Line
The Status Line displays real-time system messages that appear during
terminal emulation. This field resides at the bottom of your terminal screen,
and consists of seven separate sections. Figure A-1 shows the Status Line.
Figure A-1 Status Line
Table A-3 describes each section of the Status Line.
Status Line Errors
When an error occurs, error messages are sent from the host. They appear on
the Status Line as numbers followed by a message. To respond to Status Line
errors:
◆
Press the reset key sequence
Ctrl
(left ).
◆
Ensure that the action being undertaken is appropriate.
◆
Ensure that the field into which data is being entered is the appropriate
field.
◆
Ensure that the data being entered into the field is valid.
Table A-3 Status Line
Section Description
SA System Available
MW Message Waiting
IM Insert Mode
II Input Inhibited
TN_5250-n Telnet 5250 Emulation-Session Number
Host Host name
Help: Alt ? Help screen key sequence
SA MW IM II TN_5250-n HOST HELP: ALT?
To Next Page
Loading...
Need help?
General
