EasyManuals Logo
Home>IBM>Storage>TS2280

IBM TS2280 User Manual

IBM TS2280
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
SCD dot
If a drive memory dump is present while the drive is in maintenance mode, a single dot illuminates in
the lower right corner of the SCD (see 6 in “Front panel of the drive” on page 2). To copy the memory
dump, see “Function code 5: Copy drive dump” on page 26.
The SCD dot is on solid if the memory dump is in RAM memory. The SCD dot flashes if the memory
dump is in flash memory.
The SCD dot turns off when you obtain a dump (by using ITDT or a SCSI command) or update the drive
firmware.
Note: If the drive memory dump is stored in RAM memory (SCD dot on solid), the memory dump is
lost when you turn OFF the power or reset the drive.
Status lights
The status lights (in “Front panel of the drive” on page 2) are light-emitting diodes (LEDs) that provide
information about the state of the drive. The Ready status light is green and the Fault status light is
amber, and (when lit) solid or flashing. The Encryption status light is white.
Mode SCD Ready LED (green) Fault LED (amber)
Operational Blank On Off
Activity (tape movement)
in Operational Mode
Blank Flashing Off
Maintenance Solid character Flashing On
Executing Maintenance
Selection
Flashing character Off On
Error Condition Solid character Off Flashing
Power on / Reset
Initialization
Random segments Off On
Note: The white Encryption status light is on when the tape drive has a cartridge that is loaded and all
data on this cartridge is encrypted (excluding the label). LTO Ultrium 8, and Ultrium 7 cartridges only.
Table 4 lists the conditions of the status lights and Single-character Display (SCD) and provides an
explanation of what each condition means.
Table 4. Meaning of status lights and single-character display (SCD)
If the
green
Ready
Status
Light is...
And the
amber Fault
Status Light
is...
And the
Encryption
Status Light
is...
And the SCD
is...
And the SCD
dot is...
Meaning
Off Off Off Off Off The drive has no power or is powered
off.
On Off On/Off Off Off The drive is powered on and in an idle
state.
Note: If a cartridge is loaded, the white
Encryption status light is on when all
the data on the cartridge is encrypted
(excluding the label). LTO Ultrium 8 and
Ultrium 7 cartridges only.
14 IBM TS2280: Setup, Operator, and Service Guide Machine Type 3580 Model H8S

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM TS2280 and is the answer not in the manual?

IBM TS2280 Specifications

General IconGeneral
BrandIBM
ModelTS2280
CategoryStorage
LanguageEnglish

Related product manuals