Icom IC-A4 Instruction Manual

9
5
MEMORY PROGRAMMING
■ Programming a memory
channel
The transceiver has 19 memory channels for storage of often
-used frequencies.
q Push [V/M] to select VFO
mode, if necessary.
w Push [Y] or [Z] key to select
the desired frequency.
• Push [V/M] key one or more
times to use the dial select
function, if desired.
e Push [MW] for 5 sec. to enter
memory programming mode.
•“ ” and memory channel
number appear.
r Push [Y] or [Z] to select the
desired memory channel
number.
t Push [MW] for 2 sec. to pro-
gram the information into the
channel and return to VFO
mode.
MR
MR
MR
D Setting lockout channels
In order to speed up the scan interval, you can set memory
channels you don’t wish to scan as lockout channels.
q Push [V/M] to select memory mode, if necessary.
• “ ” appears.
w Push [Y] or [Z] to select a memory channel to set as a
lockout channel.
e Push [SCAN] for 2 sec. to toggle the lockout setting
ON/OFF.
•“SKIP” appears when the chan-
nel is set as a lockout channel.
•If memory channel scan is acci-
dentally started, push [SCAN] to
stop it.
MR
MR
SKIP
Memory channel 15 is
set as a lockout channel.
IC-A4#01 IM 01.12.5 5:14 PM Page 9 (1,1)

Icom IC-A4 Specifications

General

Brand	Icom
Model	IC-A4
Category	Transceiver
Language	English