30
5
CONNECTION AND INSTALLATION
New2001
• Connector information
■ Antenna
A key element in the performance of any communication sys-
tem is an antenna. Ask your Dealer about antennas and the
best places to mount them.
■ Fuse replacement
A fuse is installed in the supplied DC power cable. If a fuse
blows or the transceiver stops functioning, track down the
source of the problem, if possible, and replace the damaged
fuse with a new rated one.
■ Cleaning
If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
AVOID the use of solvents such as benzene or al-
cohol, as they may damage the transceiver sur-
faces.
q
LCD backlit cont. IN
w AF OUT
e Det. AF OUT
r Mod. IN
t PTT control IN
y Horn drive cont. OUT
u AF GND
i Det. AF GND
o Mod. GND
OPC-617 Pin Assignment
t r e w q
o i u y
q
N.C.
w RX D
e TX D
r DTR
t GND
y DSR
u RTS
i CTS
o N.C.
OPC-822 Pin Assignment
t r e w q
o i u y
IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 30 (1,1)
To Next Page
Loading...
Need help?
General
