Icom IC-F8101 Service Manual

1-1
SECTION 1
.
SPECIFICATIONS
M General
• Frequency coverage:
Receive 0.5–29.9999 MHz
Transmit 1.6–29.9999 MHz
• Mode:
AUS versions J3E (USB),
A3E (AM; RX only)
Other versions J3E (USB/LSB),
A3E (AM), A1A (CW),
F1B (FSK),
J2B (D1, D2, D3)
• Number of memory Channel: 500 channels
(maximum)
• Usable temperature range: –30˚C to +60˚C, –22°F
to +140°F
• Frequency stability: ±0.3 ppm (–30˚C
to +60˚C, –22°F to
+140°F)
• Antenna impedance: 50 
• Power supply: 13.8 V DC (negative
ground)
AUS versions 10.8–15.6 V DC
Other versions 11.73–15.87 V DC
• Current drain:
Transmit Less than 28 A (at
maximum power)
Receive Less than 3.0 A (at
maximum audio)
• Dimensions (projections are not included):
Main/Front package 62(H)174(W)259(D)
mm
2.4(H)6.9(W)10.2(D)
inches
• Weight (approximately):
Main/Front package 3.9 kg, 8.6 lb
M Transmitter
• Output power (typical):
AUS versions
J3E HIGH 100 W p-p
MID 50 W p-p
LOW 10 W p-p
Other versions
J3E/A1A HIGH 125 W p-p
MID 50 W p-p
LOW 10 W p-p
A3E HIGH 30 W Carrier
MID 12.5 W Carrier
LOW 3 W Carrier
F1B/J2B HIGH 75 W p-p
MID 50 W p-p
LOW 10 W p-p
• Spurious emission:
USA versions 64 dB
below peak output power
Other versions 64 dB (typical)
below peak output power
• Carrier suppression: 50 dB
below peak output power
• Unwanted sideband suppression:
400 Hz 55 dB
below peak output power
1 kHz 65 dB
below peak output power
• Duty cycle:
Voice communication 100% ( –30˚C to +60˚C,
–22°F to +140°F)
Data communication (Up to 5 minutes)
25% ( –30˚C to +30˚C,
–22°F to +86°F)
When the optional CFU-F8100 is installed (All mode)
100% ( –30˚C to +45˚C,
–22°F to +113°F)

Icom IC-F8101 Specifications

General

Brand	Icom
Model	IC-F8101
Category	Transceiver
Language	English