Cloning Items
¾DTMF Settings
Set the time period/signal length for
the DTMF Timer, First Timer,
* # Timer.
Continuous Tone
External I/O
¾CH Switch Table
Available for mobile radios only.
¾Continuous Tone
Select the desired CTCSS
frequency from the list or enter a
3-digit DTCS code with polarity,
N (Normal) or I (Inverse).
¾Port Setting
The desired function can be assigned to some of
the D-sub 25 pins on the screen.
The assignable pins are:
Ext. I/O [10]/[12]/[15]/[17]/[18]/[19]/[21]/[23]/
[24] and [25]. See 3-3 D-Sub 25 Pin Configuration
for details.
¾Continuous Tone Setting
Set the Continuous Tone Setting
items for Tone Burst, CTCSS
Reverse Burst Timer, etc.
Scan
Common
¾Scan List
Set the scan type, primary CH, secondary CH, TX
CH, Talkback CH, Cancel CH, and Text.
¾Key & Display
Assign the desired functions to the programmable
function keys. And set the keypad operation, beep
audio frequency, display mode 1 line or 2 lines, etc.
¾Set Mode
User set mode enables
ou to customize the
¾Scan setting
Set the Scan Setting items for Resume,
Talk-back, Fast Scan, Slow Scan, Power
on scan etc.
Emergency
transceiver operation to suit your preferences and
operation style.
¾Common
Commonly set items as Clone Comment, Security,
Auto Reset, Scrambler, etc. items.
Enter up to a 24-character emergency text that will
be displayed on the LCD while the emergency
function is activated. Lone Worker Timer can also
be selected.
To Next Page
Loading...
Need help?
General
