Icom IC-F9521T User Manual

4-2 Cloning Software CS-F9010/F9510
4-2-1 Basic Setup of Cloning Software
■
Gett
in
g
sta
r
ted
■
Gett g sta ted
◇This cloning software is designed to perform data
setting and cloning for the IC-F9510 series VHF
P25 TRUNKING MOBILE TRANSCEIVERS.
◇HELP WINDOW: CS-F9010/F9510 has a help
window to describe functions and operation.
■ System requirement
To use this program the following hardware and
g
T
he “User Information window” will appear as
below, then type your name, your company name
and the product ID number with the following
manner. Then click [Next >].
• ID number: 305701-(6 digit serial number)
 Please check the serial number on the CD. If you
 have obtained the software by the download
 service enter the ID which was provided from the
To use this program
,
the following hardware and
software are required:
PC
• Microsoft® Windows® 2000/XP or Microsoft®
Windows Vista® is installed.
• USB port
Oth it
 service
,
enter the ID which was provided from the
 distributor.
Oth
er
it
em
Optional OPC-1122U* CLONING CABLE (USB type)
 NOTE:
 To use the OPC-1862 /1122U, USB type cloning
 cable, USB driver installation is necessary. The
 driver is supplied with the OPC-1862 /1122U.
*The USB driver, supplied with the OPC
-
1862
hThe “Choose Destination Location” will appear as
below. Then click [Next>] to install the software to
the destination folder. (e.g. C:╲Program
Fil
╲
I
╲
CS
F9010 F9510)
 /1122U, is not supported for Microsoft®
 Windows Vista® (64 bit).
■ Software installation
 When installing the software, log in as the
 administrator.
c
Quit all applications when Windows is running.
Fil
es
╲
I
com
╲
CS
-
F9010
_
F9510)
• Click [Browse...] to select another destination
folder before clicking [Next >], if desired.
iAfter the installation is completed, the
“InstallShield Wizard Complete” will appear as
below. Then click [Finish].
c
Quit all applications when Windows is running.
dInsert the CD into the appropriate CD drive.
eDouble-click the “Setup.exe” contained in the CD.
fThe “Welcome to the InstallShield Wizard for CS-
F9010/ F9510” will appear as below. Click [Next>].
jEject the CD.
kProgram group ‘CS-F9010_F9510’ appears in the
‘Programs’ folder of the start menu, and ‘CS-
F9010_F9510’ short cut icon appears on the
desktop screen.
62
•To uninstall the cloning software, select the
“Control Panel” in the start menu, and click the
“Add or Remove Programs.” Then, select the
program group ‘Icom CS-F9010/9510’ and click
[Remove].

Icom IC-F9521T Specifications

General

Brand	Icom
Model	IC-F9521T
Category	Transceiver
Language	English