18
7
SET MODE
New2001
■ SET mode items
D Beep tone function “bP”
You can select silent operation by turning the beep tones
OFF, or you can have 2 types of confirmation beeps sound
at the push of a switch. When ON is selected, a fixed beep
(Pi) sounds, and when US is selected, the preset beeps (e.g.
do, re, mi) sound.
• Beep tone synchronises with the volume level.
• The beeps sound during call channel programming and a weather
alert tone indication even if this function is turned OFF.
D Weather alert function “AL”
An NOAA broadcast station transmits a weather alert tone
before any important weather announcements. When the
weather alert function is turned ON, the transceiver detects
the alert, the alert indicator (“ALT”) blinks and sounds a
beep tone until the transceiver is operated. The previously
selected (used) weather channel is checked any time during
standby, or while scanning, when the power save function is
activated.
• “ALT” appears when the function is set ON.
D Priority scan function “Pr”
The transceiver has 2 scan types—normal (OFF) and prior-
ity (ON) scans. Normal scan searches all tag channels in the
selected channel group. Priority scan searches all tag chan-
nels in sequence while monitoring Channel 16.
Push
Beep tone ON (default)
Beep tone OFF
User beep
Push
Weather alert function
OFF (default)
Weather alert function
ON
Push
Normal scan (default) Priority scan
To Next Page
Loading...
Need help?
General
