28
8
SET MODE
8
ï Ringer2 beep output level
Select the ringer 2 beep output level when receiving a call
from 1 to 5, or minimum output level from 1 to 5.
Ringer2 output level 3 (default) Ringer2 output level 5
ï Tone code indication type
Select the desired indication type during CTCSS or DTCS
selection mode from CTCSS/DTCS code and CTCSS/DTCS
channel number.
Tone code indication type
Code (default)
Tone code indication type
Number
ï Power save
The power save function reduces the current drain to con-
serve the battery power.
Select the power save function activity in both Analog and
Digital mode, Digital mode only or Analog mode only. Or you
can select the power save function deactivated.
Power save activity
Both (default)
Power save activity
OFF
To Next Page
Loading...
Need help?
General
