IDEC HG4F User Manual

37
5
Chapter 5 Verify Operation
Verify Operation
www.IDEC.com/software
Simulating
1. Press the [START] button.
The pilot lamp turns on.
2. Press the [STOP] button.
The pilot lamp turns off.
3. Press the [SET UP] button.
The [Numerical Target Setting Screen]
appears.
4. Press the Numerical input.
The numeric keypad appears.
5. Enter 100 , and press the [ENT]
key.
100 is set in [Numerical Target].
6. Press the [Back to the Operating
Screen] button.
The [Operating Screen] appears, and
100 is displayed in [Target].
7. Press the [SET the results] button.
Every time this button is pressed, the
value displayed in [Results] increments
by one.

IDEC HG4F Specifications

General

Brand	IDEC
Model	HG4F
Category	Touchscreen
Language	English