Warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket.
Dirty filters and clogged spray arms
decrease the washing results. Make a check regularly and, if necessary, clean them.
Cleaning the filters
1. Turn the filter counterclockwise to unlock, then lift it out of the appliance.
2. First pull the filter (A) out of the filter assembly by compressing it gently. Then the filters (B) and (C) can be
detached.
3. Rinse the filters (A), (B) and (C) with water. If necessary, use a soft cleaning brush.
4. Re-assemble the filters shown in the figure below.
5. Insert the filter assembly into position, and turn it clockwise until it locks. Make sure the arrows on the filter (B)
and (C) are aligned, as shown in the figure below.
To Next Page
Loading...
Need help?
General
