Cleaning the spray arms
We recommend to clean regularly the upper and lower spray arms to avoid soil to clog the holes.
Clogged holes can cause unsatisfactory washing results.
1. Pull out the upper and lower baskets.
2. To disengage the upper spray arm from the upper basket, locate the nut in the center position of the upper arm
and turn it counterclockwise to remove.
3. To detach the lower spray arm from the bottom of the appliance, just pull it up to remove.
4. Rinse the upper and lower spray arms under running water. Use a thin pointed tool (e.g. a toothpick) to remove
particles of soil from the holes of the arm sprays.
5. After cleaning, replace the arm sprays. To attach the upper spray arm to the upper basket, align the center
position of the upper spray arm with the nut then turn it clockwise to tighten.
To Next Page
Loading...
Need help?
General
