Before rst use
Warning! Refer to Safety
chapters.
Initial Cleaning
Step 1 Step 2 Step 3
Remove all accessories and
removable shelf supports
from the appliance.
Clean the appliance and the
accessories only with a mi‐
crobre cloth, warm water
and a mild detergent.
Place the accessories and the
removable shelf supports in
the appliance.
First connection
The display shows welcome message after the rst connection.
You have to set: Language, Display brightness, Key tones, Buzzer volume, Water hardness,
Time of day.
Initial preheating
Preheat the empty oven before the rst use.
Step 1 Remove all accessories and removable shelf supports from the oven.
Step 2
Set the maximum temperature for the function: .
Let the oven operate for 1 h.
Step 3
Set the maximum temperature for the function: .
Let the oven operate for 15 min.
The oven can emit an odour and smoke during preheating. Make sure that the room is
ventilated.
How to set: Water hardness
When you connect the oven to the mains you have to set the water hardness level.
Use the test paper supplied with the steam set.
Step 1
Step 2 Step 3 Step 4
ENGLISH 12
To Next Page
Loading...
Need help?
General