2 Interconnects
Ground
SPI
LIN
Phase 1
Phase 2
Phase 3
VBAT
uIO stick
USB
SWD
HALLTMR
Figure 2 Interconnects
Banana jacks for ground, supply and LIN
Multiple jacks are available in dierent colors for ground, supply (max. 28 V) and LIN communication via banana
jack.
Banana jacks for motor connection
The three jacks for Phase 1, Phase 2 and Phase 3 provide access to the three half bridges and for driving a
brushless motor.
uIO Stick connector
The uIO bootstrap loader is a 16-pin header (2 × 8) with 2.54 mm pitch.
This interface can be used to programming the TLE987x via LIN (see www.infineon.com/uio or www.hitex.com/
uio).
TLE987x EvalBoard
2 Interconnects
User Manual 6 v1.0
2020-07-30