To Next Page

To Previous Page

Settings menu

Audio: allows adjustments to Volume of the internal speaker. Adjustments

can also be made from the projector’s keypad and the remote.

Sources: Power-up Source determines which source the projector checks

first for active video during power-up. When the Autosource feature is On,

the projector automatically finds the active source, checking the Power-up

Source first. The options are Computer 1 for a computer source, and Video

1 (for S-video connections), and Video 2 (for composite video connections)

for video sources. When this feature is Off, the projector defaults to the

source selected in Power-up Source. To display another source, you must

manually select one by pressing the Computer or Video button on the

remote or keypad.

System: Rear reverses the image so you can project from behind a translu-

cent screen. Ceiling turns the image upside down for ceiling-mounted pro-

jection. Display Messages displays status messages (such as “Searching” or

“Mute”) in the lower-left corner of the screen. NND prevents your notebook

computer from going into Screen Save mode if the USB cable is connected.

Power Save automatically turns the lamp off after no signals are detected

for 20 minutes. After an additional 10 minutes with no signal, the projector

powers down and can be toggled off. If an active signal is received before

the projector powers down, the image will be displayed. When Power Save

is enabled, Screen Save is disabled. Screen Save automatically blanks the

screen with a black color after no signals are detected for a preset number of

minutes. The image returns when an active source is detected or a remote or

keypad button is pressed.

Settings menu

Audio

Power-up

Source

Sources

System menu

Screen Save

InFocus X1 User Manual

Other manuals for InFocus X1