‑9‑
1.3 Specifications
■ Power supply specifications
Item Specification
Rated bus input voltage 5 VDC (4.75 VDC to 5.25 VDC)
Rated bus input current 120 mA (typical@5 V)
Rated terminal input voltage 5 VDC (20.4 VDC to 28.8 VDC)
Rated terminal input current 50 mA (typical@24 V)
Rated terminal output voltage N/A
Rated terminal output current N/A
Hot swap Not supported
■ Input specifications
Item Description
Input type Analog input
Input mode Voltage/Current
Input channels 4
Resolution 16‑bit
Conversion time 60 us/ channel
Voltage input range ±10 V, 0 to 10 V, ±5 V, 0 to 5 V, 1 to 5V
Voltage input impedance 1MΩ
Voltage input accuracy (25°C) ±0.1% (full range)
Voltage input accuracy (full temperature
range)
±0.2% (full range)
Voltage input limit ±15 V
Voltage input diagnosis Wire breakage detection not supported
Current input range ±20 mA, 0 to 20 mA, 4 to 20 mA
Current sampling impedance 250 Ω
Current input accuracy (25°C) ±0.1% (full range)
To Next Page
Loading...
Need help?
General
