Preface
- 1 -
Preface
Thank you for purchasing the H3U series programmable logic
controller (PLC). It is a third-generation high-performance PLC
development by Inovance based on the new-generation industrial CPU
and FPGA hardware architecture and self-owned industrial embedded
software design.
■
Approvals
Certication marks on the product nameplate indicate compliance
with the corresponding certicates and standards.
Certication Mark Directives Standard
CE
EMC directives 2014/30/EU EN61131-2
LVD directives 2014/35/EU
EN 61010-1
EN61010-2-201
RoHS directives 2011/65/EU EN 50581
TUV -
EN 61010-1
EN61010-2-201
◆
The above EMC directives are complied with only when the
EMC electric installation requirements are strictly observed.
◆
Machines and devices used in combination with this PLC
must also be CE certied and marked. The integrator who
integrates the PLC with the CE mark into other devices has
the responsibility of ensuring compliance with CE standards
and verifying that conditions meet European standards.
◆
The installer of the PLC is responsible for complying with
all relevant regulations for wiring, circuit fuse protection,
earthing, accident prevention and electromagnetic (EMC
regulations). In particular fault discrimination for preventing
re risk and solid earthing practices must be adhered to for
electrical safety (also for good EMC practice).
◆
For more information on certication, consult our distributor
or sales representative.