- 59 -
Revision History
Date Version Change Description
Jan 2016 V0.0 Related rmware version: F7-10 = U10.05 and F7-11 = U0.06
Mar 2016 A01 Related rmware version: F7-10 = U10.06 and F7-11 = 001.00
Nov 2016 A02
Modied Approvals, designation rule and nameplate
.
Added information of three-phase models
.
May 2017 A03
Modied information of three-phase models
.
Modied information of parameters
.
Added mechanical installation and CE certication
.
Sep 2017 A04
Added single-phase and three-phase -NC models
.
Added F4-04
.
Added three-phase lter and reactor model selection
.
July 2019 A05
Editorial corrections all over the document.
Modied dimensions in "1.2 General specications".
Modied the MD200XXX-NC terminal wiring diagram.
Modied the diagram of MD200XXX main control board terminals.
Modied the setting range of F0-01, F3-01, and F4-00 to F4-04.
Modied the default value of F5-02.
Added description of the fault "The AC drive display is normal upon power-on,
but after running the AC drive displays HC and stops immediately."
To Next Page
Loading...
Need help?
General