Inovance MD380L User Manual

16
4.3 Setup flowchart
START
Para
Parameter name Default
Commissioning
Ahead of setup
Default values are elicited from enormous real elevator applications, so users can rely
on them usually, only some adjustments are necessary.
If parameter restoration is prohibited due to some reasons, then the following steps
have to be followed one by one.
Remove DI wirings
usually if any DI is set as Forward or Reverse run and if signal is active, then some
operations cannot succeed,
such as restoring parameters, changing command source,
wirings at the beginning of commissioning.
Restore parameters
FP-
01
Parameter operation 0 1
0: No operation
1: Restore default settings except motor parameters
2: Clear records including errors
4
501: Backup parameters
NOTEto
restore parameters to default at the beginning of commissioning.
Set motor parameters
Motor Nameplate
F1-
01
Rated motor power
model dependent
Unit: kW
F1-
02
Rated motor voltage 400
Unit: V
F1-
03
Rated motor current model
dependent
Unit: A
F1-
04
Rated motor frequency 50.00
Unit: Hz
F1-
05
Rated motor speed 1440
Unit: rpm.
CONTINUE
Para.
Parameter name Default
Commissioning

Inovance MD380L Specifications

General

Brand	Inovance
Model	MD380L
Category	DC Drives
Language	English