Insignia NS-42E859A11 User Manual

www.insigniaproducts.com
35
NS-32E859A11/NS-42E859A11 Getting Started
Understanding the basics
Turning your TV on or off
To turn your TV on and off:
1 Make sure that the power cord is already connected to a
power outlet.
2 Press (power) to turn on your TV. The power indicator LED
turns blue.
3 Press (power) again to turn off your TV. Your TV enters
Standby mode and the power indicator turns red or purple,
depending on the TV power on mode you select. For more
information, see “Setting the TV power on mode” on
page 93.
Selecting the video input source
To select the video input source:
1 Turn on your TV, then press INPUT on the remote control.
The input source list opens.
2 Press S or T to highlight a video input source, then press
SELECT. You can select:
•TV
•HDMI 1
•HDMI 2
•HDMI 3
•HDMI 4
• Component/Composite (to select a component or
composite device)
•VGA
Warning
When your TV is off, power still flows into it. To
disconnect power, unplug the power cord.
Note
If your TV does not detect a signal and you do not
press any buttons for several minutes, your TV goes
into Standby mode automatically.
Note
If the source sensor is turned on, the inputs that do
not have devices connected are grayed in the input
source list. When you press INPUT, your TV moves
between the inputs that have devices connected.
You can select a grayed input by pressing
S or T. For
more information, see “Turning the source sensor on
or off” on page 95.
Component/Composite
HDMI 1
HDMI 2
HDMI
3
HDMI 4
VGA
TV

Insignia NS-42E859A11 Specifications

General

Display diagonal	42 \
Display brightness	450 cd/m²
Supported video modes	1080p
Contrast ratio (dynamic)	12000:1
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	No
Backlight	-
Headphone connectivity	3.5 mm
HDMI ports quantity	4
DVI-D ports quantity	1
DVI-I ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible memory cards	Not supported
Product color	Black
Panel mounting interface	200 x 200 mm
RMS rated power	- W
Number of speakers	3
Power consumption (standby)	1 W
Power consumption (typical)	115 W
Remote control type	Standard

Weight and Dimensions

Depth (with stand)	279.4000 mm
Weight (with stand)	17780.8209 g
Depth (without stand)	50.8000 mm
Width (without stand)	990.6000 mm
Height (without stand)	609.6000 mm
Weight (without stand)	14605.6743 g