Insignia NS-RFD26SS9 User Manual

www.insigniaproducts.com
12
26.6 Cu. Ft. French Door Refrigerator
Leveling your refrigerator
Leveling your refrigerator is important. If you do not level your refrigerator during installation, the doors may not close or
seal correctly which can cause cooling, frost, or moisture problems.
• Rotate the adjustable feet clockwise to raise or counter-clockwise to lower your refrigerator. To make sure that the
doors close automatically, tilt the top of your refrigerator backward about 0.4" (10 mm) to 0.6" (15 mm). If necessary,
use a spanner wrench to adjust the feet.
CAUTION: The rollers are not casters. Use the rollers to move your refrigerator forward or backward. Do not use the rollers to move
your refrigerator from side to side. You might damage the floor or the rollers.
Note: To make it easier to adjust the feet, have someone tilt your refrigerator while you adjust the feet.
0.4" (10 mm) to
0.6" (15 mm)
Adjustable
foot
Roller Roller
NS-RFD26SS9_18-0333_MAN_V3_EN.fm Page 12 Tuesday, June 12, 2018 9:16 AM

Insignia NS-RFD26SS9 Specifications

General

Style	French Door
Color	Stainless Steel
Number of Doors	3
Total Capacity	27.8 Cu. Ft.
Refrigerator Capacity	14.8 cu. ft.
Freezer Capacity	7 cu. ft.
Number of Refrigerator Shelves	5
Number of Refrigerator Bins	6
Humidity Controlled Crispers	2
Number of Freezer Shelves/Baskets	1 Drawer Divider
Refrigerator Temperature	-
(-14°C)	-
Refrigerator Special Features	Power Freeze and Power Cool
Freezer Special Features	DuraBase Solid Drawer Base
Defrost System	-
Noise level	-
Refrigerant	-
Energy Class	-
Annual Energy Consumption	624 kWh
Voltage	115 V
Frequency	60 Hz
Current	-

Weight and Dimensions

Depth	36 1/4 in
Height	69 5/8 in
Width	29 3/4 in
Net Weight	313 lbs