Insignia NS-RGFCES2-C User Manual

www.insigniaproducts.com
14
Selecting a location
Clearances and dimensions
BEFORE YOU BEGIN to install your range, refer to the following information, dimensions, and clearances. Do not install your
range where it may be subject to strong drafts. Provide adequate clearances between your range and adjacent
combustible surfaces. These dimensions must be met for safe use of your range. The location of the electrical outlet may
be adjusted to meet the following dimensions and clearances.
For installation in Canada, a free-standing range is not to be installed closer than 4.7 in. (12 cm) from any adjacent surface.
CAUTION:
Your range has been designed to comply with the maximum allowable wood cabinet temperature of 194° F (90 °C). Make sure that the
wall covering, counter tops, and cabinets around your range can withstand the heat (up to 194° F (90° C)) generated by your range. If
not, discoloration, de-lamination, or melting may occur.
36 - 37 in.
(91.4 - 94 cm)
25 in. (63.5 cm)
24.8 in. (63 cm)
36.5 - 37.5 in.
(92.7-95.2 cm)
30 in. (76.2cm)
29.9 in.
(75.9 cm)

Insignia NS-RGFCES2-C Specifications

General

Brand	Insignia
Model	NS-RGFCES2-C
Category	Convection Oven
Language	English