10
NS-WC29SS9
www.insigniaproducts.com
8 Use a Phillips screwdriver to remove the hinge bolts, then remove the lower
hinge and the leveling foot.
9 Attach the lower hinge and leveling feet to the opposite sides of the wine
cooler.
10 Replace the glass door, then reinstall the upper hinge. Make sure that you
align the door and check the tightness of the door gasket.
11 Adjust the leveling feet to level the cooler.
Grounding requirement
This cooler must be grounded. This cooler is equipped with a cord having a
grounding wire with a grounding plug. The plug must be inserted into an outlet
that is properly installed and grounded.
Hinge bolts
Lower hinge
Leveling foot
Leveling foot
Lower hinge
Hinge bolts
Axle sleeve
Hinge cover
Hinge bolts
Upper hinge
Axle sleeve
Rivets
To Next Page
Loading...
Need help?
General
