Integra RDC-7 User Manual

95
CONFIRMATION
1.TEST MODE
TEST - 1
00
TEST - 1
01
TEST - 3
00
TEST - 3
13
TEST - 2
00
TEST - 2
25
######
$$$$$$
TEST - 1
00
DVD
Clear
FL tube turned off
1. Turn POWER switch to set the the unit to standby state.
2. Press STANDBY/ON button to turn on the unit.
The STANDBY indicator will light up.
The display will light up and the STANDBY indicator will turn off.
3. Press and hold down CD button, then press DISPLAY and STANDBY/ON buttons at the same time.
During "
Test - 1 00 " on the FL tube light on.
4. Press the OPEN/CLOSE button to open the front door.
5. Press the CD,VIDEO 1, VIDEO 2, or VIDEO 3 button to set the unit to the test mode shown below.
Press
CD button
Press
VIDEO 3
button
Press
VIDEO 2
button
Press
VIDEO 1
button
Press
Rec Out button
Press
Zone2 button
All segments light on.
The segments of
even number light on.
The segments of
odd number light on.
32109876543210
09876543210987
"Good bye"
" AA BB CC DD EE"
Press
Rec Out
button
Press
Zone2
button
TEST-1
Protect /Tuner
test mode
Item : 00, 01
TEST-2
Audio test mode
Item : 00 to 25
TEST-3
Audio test mode
Item : 00 to 13
DSP Read check
waiting . . .
After 10 seconds.
After confirmation, turn the STANDBY/ON switch to OFF to reset the unit.
Version of Q728
Version of Q768
2. CONFIRMATION OF READING AND WRITING OPERATION OF FLASH MEMORY
How to set the unit to the test mode "test 1-00".
During "
TEST 1-00 " on the FL tube light on, press VIDEO 4 button to set the unit confirmation mode of this item.
Confirm the display on FL tube.
AA: power amplifier function
"
AM " with power amplifier " "without power amplifier
BB : Video mode
"
PL " PAL available, " NS " NTSC
CC : 12V trigger function
"
TR " Available " "No available
DD : RDS function
"
RD " Available " " No available
EE : Region
"
EU " Europe, " SA " Asia, " US " USA, " JP " Japan
Item
Ex. European model " PL TR RD EU"

Integra RDC-7 Specifications

General

Brand	Integra
Model	RDC-7
Category	Controller
Language	English