EasyManuals Logo
Home>Intel>Motherboard>D845PEBT2

Intel D845PEBT2 User Manual

Intel D845PEBT2
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
Intel Desktop Board D845PEBT2 Technical Product Specification
120
Table 89. BIOS Error Messages (continued)
Error Message Explanation
Checking NVRAM..... NVRAM is being checked to see if it is valid.
Update OK! NVRAM was invalid and has been updated.
Updated Failed NVRAM was invalid but was unable to be updated.
Keyboard Error Error in the keyboard connection. Make sure keyboard is
connected properly.
KB/Interface Error Keyboard interface test failed.
Memory Size Decreased Memory size has decreased since the last boot. If no memory
was removed then memory may be bad.
Memory Size Increased Memory size has increased since the last boot. If no memory was
added there may be a problem with the system.
Memory Size Changed Memory size has changed since the last boot. If no memory was
added or removed then memory may be bad.
No Boot Device Available System did not find a device to boot.
Off Board Parity Error A parity error occurred on an off-board card. This error is followed
by an address.
On Board Parity Error A parity error occurred in onboard memory. This error is followed
by an address.
Parity Error A parity error occurred in onboard memory at an unknown
address.
NVRAM/CMOS/PASSWORD cleared by
Jumper
NVRAM, CMOS, and passwords have been cleared. The system
should be powered down and the jumper removed.
<CTRL_N> Pressed CMOS is ignored and NVRAM is cleared. User must enter Setup.

Table of Contents

Other manuals for Intel D845PEBT2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel D845PEBT2 and is the answer not in the manual?

Intel D845PEBT2 Specifications

General IconGeneral
BrandIntel
ModelD845PEBT2
CategoryMotherboard
LanguageEnglish

Related product manuals