Technical Reference
87
2.15.3 Product Certification Markings (Board Level)
The Desktop Board D845PEBT2 has the following product certification markings:
• UL joint US/Canada Recognized Component mark: Consists of lower case c followed by a
stylized backward UR and followed by a small US. Includes adjacent UL file number for
Intel
Desktop Boards: E210882 (component side).
• FCC Declaration of Conformity logo mark for Class B equipment; to include Intel name and
D845PEBT2 model designation (solder side).
• CE mark: Declaring compliance to European Union (EU) EMC directive (89/336/EEC) and
Low Voltage directive (73/23/EEC) (component side). The CE mark should also be on the
shipping container.
• Australian Communications Authority (ACA) C-Tick mark: consists of a stylized C overlaid
with a check (tick) mark (component side), followed by Intel supplier code number, N-232.
The C-tick mark should also be on the shipping container.
• Korean EMC certification logo mark: consists of MIC lettering within a stylized elliptical
outline.
• Printed wiring board manufacturer’s recognition mark: consists of a unique UL recognized
manufacturer’s logo, along with a flammability rating (94V-0) (solder side).
• PB part number: Intel bare circuit board part number (solder side). For the Desktop Board
D845PEBT2, the PB number is A99718-xxx or C10869-xxx (where xxx is any number). The
SKU number (component side) is AA followed by additional alphanumeric characters.
• Battery “+ Side Up” marking: located on the component side of the Desktop Board
D845PEBT2 in close proximity to the battery holder.
To Next Page
Loading...
Need help?
General
