Intel D845PEBT2 User Manual

Intel Desktop Board D845PEBT2 Technical Product Specification
74
2.10 Mechanical Considerations
2.10.1 D845PEBT2 Form Factor
The Desktop Board D845PEBT2 is designed to fit into an ATX-form-factor chassis. The board
dimensions depend on the board version, as shown in the table below. The location of the board’s
AA number is shown in the Figure 12 on page 57.
Table 54. Board Dimensions
A Board with
This AA Number
(where xxx is
any number)
Or These Included Manufacturing
Options
Has These Board Dimensions
in Inches [Millimeters]
As Shown in
A99697-xxx 2-channel audio subsystem 12" x 8.2"
[304.80 mm x 208.28 mm] Figure 18
C10867-xxx • 6-channel audio subsystem
• IEEE 1394a-2000 subsystem
12" x 8.5"
[304.80 mm x 215.90 mm] Figure 19
C12587-xxx • 6-channel audio subsystem
• (No IEEE 1394a-2000
subsystem)
12" x 8.5"
[304.80 mm x 215.90 mm] Figure 19
In the figures, dimensions are given in inches [millimeters]. Location of the I/O connectors and
mounting holes are in compliance with the ATX specification (see Section 1.4).
OM15036
1.70
[43.18]
5.55
[140.97]
6.45
[163.83]
6.50
[165.10]
5.20
[132.08]
6.20
[157.48]
6.10
[154.94]
4.90
[124.46]
0.00
0.00
1.80
[45.72]
2.60
[66.04]
Figure 18. 12" x 8.2" Desktop Board Dimensions

Intel D845PEBT2 Specifications

General

Brand	Intel
Model	D845PEBT2
Category	Motherboard
Language	English