使用 BIOS Setup(设置)程序
89
Hard Disk Drives(硬盘驱动器)子菜单
Main Advanced Security Power Boot Exit
1
st
Drive [xxxxxxxxxxxxx]
2
nd
Drive [xxxxxxxxxxxxx]
3
rd
Drive [xxxxxxxxxxxxx]
4
th
Drive [xxxxxxxxxxxxx]
Specifies the boot sequence
from the available devices.
Select the boot device with
UpArrow or DownArrow key.
Press Enter to set the
selections as the intended
boot device. ARMD = ATAPI
Removable Media Device.
← →
Select Screen
↑ ↓
Select Item
Enter Select ` Sub-Menu
F1 General Help
P9 Setup Defaults
F10 Save and Exit
ESC Exit
表 35 显示了用于设置硬盘驱动器的选项。
表 35. Hard Disk Drives(硬盘驱动器)子菜单
功能 选项 说明
1
st
Hard Disk Drive
(第一硬盘驱动器)
(注释)
取决于已安装的硬盘
驱动器
从可用的硬盘驱动器设备中指定启动的优先顺序。要指定
启动顺序:
1. 用 <↑> 或 <↓> 键选择启动设备。
2. 按 <Enter> 键将所选设备设为期望顺序的启动设备。
注释: 在系统中安装了至少一个此类型的启动设备时才显示此启动设备子菜单。此顺序列表中最多可显示十二个硬盘
驱动器,这是 BIOS 可支持的最多硬盘驱动器数。