EasyManuals Logo
Home>Intel>Motherboard>DZ77SL-50K

Intel DZ77SL-50K User Manual

Intel DZ77SL-50K
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Product Description
19
1.4 System Memory
The board has four DIMM sockets and supports the following memory features:
1.5 V DDR3 SDRAM DIMMs with gold plated contacts, with the option to raise the
voltage to support higher performance DDR3 SDRAM DIMMs.
1.35 V Low Voltage DDR3 DIMMs (JEDEC specification)
Two independent memory channels with interleaved mode support
Unbuffered, single-sided or double-sided DIMMs with the following restriction:
Double-sided DIMMs with x16 organization are not supported.
32 GB maximum total system memory (with 4 Gb memory technology). Refer to
Section 2.1.1 on page 41 for information on the total amount of addressable
memory.
Minimum recommended total system memory: 1 GB
Non-ECC DIMMs
Serial Presence Detect
DDR3 1066 MHz to +2667 MHz SDRAM DIMMs
Note: DDR3 1600 MHz DIMMs are only supported by 3
rd
generation Intel Core
processor family processors
XMP version 1.3 performance profile support for memory speeds up to +2667 MHz
NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board
should be populated with DIMMs that support the Serial Presence Detect (SPD) data
structure. This allows the BIOS to read the SPD data and program the chipset to
accurately configure memory settings for optimum performance. If non-SPD memory
is installed, the BIOS will attempt to correctly configure the memory settings, but
performance and reliability may be impacted or the DIMMs may not function under the
determined frequency.
Table 3 lists the supported DIMM configurations.
Table 3. Supported Memory Configurations
DIMM
Capacity
Configuration
(Note)
SDRAM
Density
SDRAM Organization
Front-side/Back-side
Number of SDRAM
Devices
1024 MB SS 1 Gbit 128 M x8/empty 8
2048 MB DS 1 Gbit 128 M x8/128 M x8 16
2048 MB SS 2 Gbit 256 M x8/empty 8
4096 MB DS 2 Gbit 256 M x8/256 M x8 16
4096 MB SS 4 Gbit 512 M x8/empty 8
8192 MB DS 4 Gbit 512 M x8/512 M x8 16
Note: “DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers to
single-sided memory modules (containing one row of SDRAM).
For information about… Refer to:
Tested Memory http://support.intel.com/support/motherboards/desktop/sb
/CS-025414.htm

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel DZ77SL-50K and is the answer not in the manual?

Intel DZ77SL-50K Specifications

General IconGeneral
BrandIntel
ModelDZ77SL-50K
CategoryMotherboard
LanguageEnglish

Related product manuals